Reduce mosquito breeding sites around your home

ABOVE: Aedes aegypti, the mosquito which transmits the Ross River virus from animals to humans.

Reducing the number of mosquito breeding areas around your home will lower your risk of being bitten by a mosquito.

Mosquitoes lay their eggs in standing water so the following actions are recommended to reduce the number of mosquito breeding sites around your home.

Standing Water

  • Remove all discarded tires from your property. Drill holes in the bottom of tires used for swings or other playground equipment so water cannot collect in them.
  • Turn over or remove all water-holding containers (tin cans, plastic jugs) lying around your yard.
  • Drill holes in the bottom of any unused containers so water won’t collect.
  • Turn over plastic wading pools and wheelbarrows when not in use.
  • Eliminate any standing water that collects on your property.


  • Change the water and clean birdbaths weekly. Cleaning the bath removes organic matter and changing the water removes any mosquito eggs or larvae.

Eaves and Drains

  • Clear leaves and twigs from eaves, troughs, storm and roof gutters throughout the summer.
  • Check flat roofs frequently and remove any standing water.

Around Your Yard and Lawn

  • Remove dense brush and weeds where mosquitoes rest and hide during the day.
  • Turn over compost piles on a regular basis.
  • Fill in any low depression areas in lawns.
  • Immediately throw away raked leaves and other decaying items, such as apples or berries, that fall from trees. If they are not to be composted, place them in a closed container until disposal.
  • Let your neighbours know about potential mosquito breeding grounds on their property.

Ornamental Ponds and Pools

  • Locate ponds in an open space not sheltered from the wind. The wind may cause movement on the surface of the water that will deter female mosquitoes from laying their eggs at that site.
  • Concrete, stone or plastic construction of the pond is preferable to soil sides and bottom. Soil provides organic matter, which becomes a source of food for the mosquito larvae; this makes the pond a more suitable site for breeding. Concrete, stone or plastic places a barrier between the organics in the soil and the water in the pond, thereby lowering the potential food supply.
  • Construct the pond with a steep slope. Mosquitoes prefer to breed in shallow water, and by building the pond with steep slopes, there is less shallow water and the mosquitoes are discouraged to use the site for breeding.
  • Movement of water surface will discourage females from laying their eggs. An aerator or fountain should be installed to keep a constant movement on the water surface.
  • Some fish are known to eat mosquito larvae and have been used to keep numbers under control.
  • Ensure ponds are maintained and all grass clippings, leaves and debris are removed. This debris supplies the food the larvae need to survive.
  • Maintain the area surrounding the pond. Long grasses and weeds along the edge of the pond protect the larvae from potential predators and make it easier for the adult to lay eggs.

Swimming Pools

  • When properly maintained, swimming pools provide a very poor mosquito-breeding site. They are too deep, have a circulation and filter system, are chlorinated and cleaned regularly. However, if allowed to sit idle and not maintained or operated, they can become a mosquito breeding area.
  • If the pool cover is left on for an extended period, water and organic matter can collect. This creates a good breeding site for mosquitoes.
  • Remove the organic matter and water from the pool cover weekly and allow the cover to dry to kill mosquito larvae.

Keep mosquitoes out of the house

  • Make sure that doors and windows have tight-fitting screens. Repair or replace all torn screens.
  • If there are no screens, keep doors and windows closed from early evening to early morning.
Last updated: 13 February 2017